JacobNunley
IS-IT--Management
Does anyone know if you can use this for calling an Analog modem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco ATA-186-I1 Analog Adapter
- Thread starter JacobNunley
- Start date
- Status
Planetmaker
Technical User
Yes I have used the ATA for connection to modems - like any analogue device the ATA is just an adaptor for them be used on VoIP be it modem, fax or phone.
jtphoneman
Programmer
Yes, we have them on Fax machines. I ran into a problem with the ATA dropping faxes but it was a timing issue. Works well now that problem is corrected.
- Thread starter
- #5
JacobNunley
IS-IT--Management
When I use the ATA to connect to a router, I disconnect ever 20 seconds to 50 seconds.
jtphoneman
Programmer
The Call Manager was set to Clock Internal on the Gateway Endpoint, I set it to External and on the Gateway I set clock source line and network-clock-select 1 T1 0/0/0. On the ATA I set the AudioMode to 0X00150015
- Status
Similar threads
- Question