Cisco AS5300: Routing calls from VoIP dial-peer to VoIP dial-peer 1

[isa154]

This question is about the Cisco AS5300 as a H323 gateway.

Is it possible to route an inbound VoIP call to an outbound VoIP dial-peer ?

I know that:
POTS -> VoIP works,
VoIP -> POTS works,
POTS -> POTS works,
VoIP -> VoIP can't make it work? is it possible? how?

i need this to conference two Voip call legs on the Cisco AS5300 Access Router.

 

[BuckWeet]

No, its not possible.. It sounds like you want a conference bridge.. The only way possible on Cisco boxes is to do something like a CallManager and have a DSPFARM for conferencing. The DSPFARMS are SCCP controlled, of there is also the conference connection server that cisco has, which still requires a callmanager. You could possible do some kind of tradition pbx solution, but that is all dependent onto the pbx you connect..

BuckWeet

 

[isa154]

Thanks BuckWeet. I needed that confirmation, now I can move on. I will try using CallManager.