I have 2 new 881's and I setup a site to site tunnel and that is working fine. On one of the boxes I have NAT turned on and port forwarding setup for remote access (ex. Remote desktop). With port forwarding on I was able to get in from off the network but not through the vpn tunnel. I deleted the port forward and now I can get in through the vpn. I would like to be able to do both from the public side and the vpn side. I think on the NAT port forward I can setup 2 rules 1 for FastEtherNet 4 and the other VLan using the same ports. Correct?
I have tried the above but I think my firewall is blocking it now and I can't seem to figure how to open port 3389 to my local IP. any help would be great.
Note: I'm use Cisco Configuration Professional
I have tried the above but I think my firewall is blocking it now and I can't seem to figure how to open port 3389 to my local IP. any help would be great.
Note: I'm use Cisco Configuration Professional
