Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco 837 factory reset
- Thread starter casey1000
- Start date
computerhighguy
IS-IT--Management
Go into config mode
Issue the following commands
Write erase
reload
If it asks you to save the current configuration, don't.
When it reboots, it will be the way it came from the factory.
It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)
Issue the following commands
Write erase
reload
If it asks you to save the current configuration, don't.
When it reboots, it will be the way it came from the factory.
It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)
Don't Don't Don't do the above anyone that reads this
erasing the flash will kill your router
not for ever but until you manage to get a new image for it !!!!!!!!!
only erase startup config
erase flash should only be used by people that know what there doing
many thanks
Terry
erasing the flash will kill your router
not for ever but until you manage to get a new image for it !!!!!!!!!
only erase startup config
erase flash should only be used by people that know what there doing
many thanks
Terry
- Status
