Hi,
I need configure my cisco 827; in this moment my adsl line works with a telindus 1124 and I have saved telindus configuration and my target is reproduce it for my cisco 827 I think possible with "FastStep by Cisco". I hope in this forum there is a people can help me.
Best Regards
************************************************
"Configuration Profile for Telindus ADSL Router/Bridge Router"
[General Configuration]
Profile Version=5.0
Router Version=NDS1260HE-TLI, ver 6.0.27. Tue Jul 30 19:16:36 2002
Router Name=180208
Router Password= *********
Primary DNS=0.0.0.0
Secondary DNS=0.0.0.0
[LAN Interface]
LAN IP Address=10.1.1.10
LAN Subnet Mask=255.255.0.0
Private IP Mode=0
Private IP Address=0
Private Subnet Mask=0
DHCP Mode=1
RIP on LAN=0
IGMP=0
[DSL Configuration]
DSL Line Mode=2
PPTP=0
Global Bridge=0
[ATM PVC #0]
ATM PVC Name=atmpvc0
ATM PVC Index=0
VPI Number=8
VCI Number=35
Bridge Enabled=0
OAM F5 Timer=0
Encapsulation=0
VCMUX=1
Service Type=0
PCR=1500
MCR=0
ICR=0
MBR=0
Inarp Period=0
Remote IP Address=0.0.0.0
Inarp Enabled=0
Unnumbered=0
Local IP Address=82.74.86.244
Local Subnet Mask=255.255.255.0
Local IP Address2=0.0.0.0
Local Subnet Mask2=0.0.0.0
NAT IP Address=82.74.86.244
NAT Pool IP Address=0.0.0.0
NAT Pool Mask=0.0.0.0
NAT IP Specified=1
Auth Type=0
PPP UserName=
PPP Password=
RAS UserName=
RAS Password=
RIP=0
[ATM PVC]
ATM PVC Number=1
[IP Routing Table]
IP Routing Number=1
Destination1=0.0.0.0
Subnet Mask1=0.0.0.0
Gateway1=0.0.0.0
Interface1=8
Interface ID1=0
[IP Filter Table]
IP Filter Number=0
[Bridge Filter Table]
Bridge Filter Number=0
[Port Mapping Table]
Port Mapping Number=0
App View Numbers=0
[Auto Forwarding Table]
Auto Forwarding Number=0
**************************************************
