Cisco 800 series load-sharing????

[Davembg]

We have (2) ISP's, looking to load-share between them.
YES - outgoing only. DNS round-robin is good enough for us....

Here's some starting links -

NAT on a stick -

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094430.shtml

Unequal links load sharing -

http://www.tek-tips.com/viewthread.cfm?qid=1179524&page=1

Configure EIGRP -

http://www.routergeek.net/content/view/42/37/

Too bad the 800 series doesn't support BGRP - Easy to configure....

I do have the router functioning with 2 routes, but, can't load share with them. I think an outside rotary nat pool might do the trick, that's next on my list to try with CEF. Feel free to chime in anytime.....

Also, PAT assistance would be helpfull too.
-dave