cisco 7960 on IP500 v5

[vid151]

anyone get a cisco phone to register to an IPoffice?

I can see it in monitor ( talking not registered)
Phone is ex 777
FYI phone is at 10.0.0.89/24
gateway is 10.0.0.243
phone system IP500 is 10.20.0.20/24
routing is in place and working.
I have IP endpoint license in and valid

keep seeing


SIP Rx: UDP 10.0.0.89:50076 -> 10.20.0.20:5060
REGISTER sip:10.20.0.20 SIP/2.0
Via: SIP/2.0/UDP 10.0.0.89:5060;branch=z9hG4bK5c25d70f
From: sipave@10.20.0.20
To: sipave@10.20.0.20
Call-ID: 00036b40-88040002-23b423cb-2f17a8ce@10.0.0.89
CSeq: 2797 REGISTER
User-Agent: CSCO/7
Contact: <sipave@10.0.0.89:5060>
Content-Length: 0
Expires: 3600

SIP Tx: UDP 10.20.0.20:5060 -> 10.0.0.89:50076
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 10.0.0.89:5060;branch=z9hG4bK5c25d70f
From: <sipave@10.20.0.20>
To: <sipave@10.20.0.20>;tag=2558d826f919cada
Call-ID: 00036b40-88040002-23b423cb-2f17a8ce@10.0.0.89
CSeq: 2797 REGISTER
User-Agent: IP Office 5.0 (8)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, SUBSCRIBE, REGISTER, PUBLISH
Content-Length: 0


the User is Name "Dave"
extn 777
full name is Dave

extn is SIP and extn 777

any help or place to look is apreaceated

thanks
Dave Rahn

 

[Bas1234]

How dare you!!!!
Won't work but you could try to untick "Force Authorization" see Extension/User/Extn tab.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[vid151]

How dare you!!!!Won't work but you could try to untick "Force Authorization" see Extension/User/Extn tab. "

I am a BP I am doing is as a point of interest. and a "Yes we can do that if you really want to ..." or the like

any reason why it wont work? anything documented as to what is different?( or that I can show to the above example customers?)
I can get the Cisco phone to register with my asterisk box. It is SIP, not cisco skinny prot...

I have tried the regiser tick box... will try again.


Thanks for the info.

Dave

 

[tlpeter]

It should work but the 403 forbidden says it all

Do you have auto create extension turned on for sip ?
IS there an option to put in a password ?

Check these settings:


User Name is the Authentication Name – on Nokia SIP Endpoints, you may need to enter this as a number i.e. the extension number
User Login Code in Telephony/Supervisor Settings is the Authentication Pass code
Users Extension Number is the SIP ID
In Manager/User/Telephony enable “Call Waiting” – this may be required to allow call transfer.
Configure the Endpoint to use UDP
Enter the Server addresses as the IP Address of the IP Office control unit
In Manager/LAN1 or 2/VoIP check “SIP Registrar Enable” on
In Manager/Licence you need one instance of the IP-Endpoint Licence for each SIP Endpoint registered




ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!