mainstreetexpress
Technical User
Hi
I am thinking about deploying a 7604 for our network. In the past I have deployed 7206's obviously with different hardware architecture.
I have a couple of questions:
1. There seems to be a clock card module now, is that necessary, and if so what for? I assume any clocking would be taken off the line.
2. Regarding the SIP cards, 200, 400 and 600, I can see that the higher the number the more pps thay can handle, but are ther limitations i.e. the 200 can't handle some cards whereas the 600 can etc. Cisco seem to be a bit vague about this
Thanks
Mark
I am thinking about deploying a 7604 for our network. In the past I have deployed 7206's obviously with different hardware architecture.
I have a couple of questions:
1. There seems to be a clock card module now, is that necessary, and if so what for? I assume any clocking would be taken off the line.
2. Regarding the SIP cards, 200, 400 and 600, I can see that the higher the number the more pps thay can handle, but are ther limitations i.e. the 200 can't handle some cards whereas the 600 can etc. Cisco seem to be a bit vague about this
Thanks
Mark
