Cisco 7500 series routers

[jrichv]

Does anyone have a 7500 series router with dual RSP cards? If so, what are you running for redundancy/failover between the two cards?

Thanks,
jrichv

 

[vipergg]

Don't quite understand what you are asking here ,could you clarify ?

 

[jrichv]

Let me rephrase and clarify: If you have a 7500 router, how many Route Switch Processor cards do you have installed - one or two? If you have two RSP's installed, are they in active/standby mode, with one running as the active RSP, and the other one ready to take over in the event of a failure on the first one?

thanks,
jrichv

 

[vipergg]

We mostly have one in each router though we do have a couple with dual rsp's . The primary slot6 I believe will run unless there is a problem at which time it would switch over to the secondary slot 7. If you make a config change on the primary it will automatically get updated on the 2nd rsp .