Cisco 7200 Input queue drops - no congestion

[leedsit]

Hi,

Have two newly installed cisco 7200`s. Both have LES 100 Circuits connected to their FA2/1 Interfaces. The LES 100 circuits are the local tail for our MPLS connection into a common VPN. On both routers we are getting the following

Input queue: 0/75/949975/0 (size/max/drops/flushes); Total output drops: 0

Lots of Input Queue Drops..... even though the circuit is not busy. Were only advertising out the Local LES BGP Route and no other interfaces are up. Were testing the router and circuit for a week or two to ensure its stable.

Not sure why we are getting input queue drops when the queue is not filling! Any suggestions would be greatly appreciated.

Lee

LEEroy
MCNE6,CCNP,CWNA,CCSA,Project+

 

[leedsit]

Problem Solved... dont quite understand.... BT moved the LES 100 circuit from the Fast Ethernet Module to a GIG module and set the speed to 100 and all works well!

LEEroy
MCNE6,CCNP,CWNA,CCSA,Project+