cisco 4000 IOS 12.0

[buzcuz]

The 4000 has two serial ports and two ethernet ports. E0 is connected to internal Bay 450T. I am trying to connect E1 to DSL Router (Speed Stream from SBC). Can not find where in IOS it allows to connect to PPP. Must we use a serial port to do this? Any help would be appreciated.
Thanks
Buz

 

[jgercken]

According to the Cisco website PPPOE client isn't something that's supported on the 4000 platform. Most of the newer platforms have the feature appearing in 12.2(3) and later. This may not be the whole story since I really think I remember hearing it was supported on the 2500 series. If I were you I'd upgrade to 12.2 and seeing for yourself.

Noted platforms supporting PPPOE:
1600R
1600
1710
1720
1721
1751-V
1751
1760
2420
2600
2691
3620
3631
3640
3660
3725
3745
6400-NRP-1
6400-NRP-2SV
7200
7400
7500
806
826
827-4V
827
828
IGX8400-URM
ubr925
----------------------------------------
Wasabi Pop Tarts! Write Kellogs today!