Cisco 2900 - Bandwidth Restriction

[ilkertanli]

I need to set some bandwidth restrictions on my Cisco 2900 switch. I have a 10 Mbit Internet connection and I wanna divide this into T1's. For example I dont want my port 4 to use more than 1 T1 bandwidth in my network, therefore I tried this:

interface FastEthernet0/4
bandwidth 1544
duplex full
no fair-queue

But it didn't work. Does anyone know how I could do this on Cisco 2900?

Thanks;

Ilker Tanli

 

[vipergg]

That is an old switch and will not do any QOS that i know of . The bandwidth command will not doing anything to limit traffic . you will need a newer high end switch to do any kind of QOS at the switch level.