Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco 2620 Async ports (Cable type)
- Thread starter bluelight
- Start date
I think the cables you want are the 8-port octal cable commonly advertized for use with the 2511. It has a centronix connector on one end splitting into 16 RJ-45's.
Bad news is that you can't connect em to your 2501's serial ports. Async and sync don't mix. You may be able to get it to connect to your aux port. The NM-32A is an expensive module and if it were me I'd sell it and use the $$ to buy two more 2500's.
----------------------------------------
Wassabi Pop Tarts! Write Kellogs today!
Bad news is that you can't connect em to your 2501's serial ports. Async and sync don't mix. You may be able to get it to connect to your aux port. The NM-32A is an expensive module and if it were me I'd sell it and use the $$ to buy two more 2500's.
----------------------------------------
Wassabi Pop Tarts! Write Kellogs today!
- Status
Similar threads
- Locked
- Question