Cisco 2500 series router, Startup issues.

[khanza]

Ok, so I connected to the router, through my serial port into my router's "console" port.
I hypertermial'ed in and this is the screenshots -
<img src="

http://img.photobucket.com/albums/v48/Pozican/top-router.jpg">

<img src="

http://img.photobucket.com/albums/v48/Pozican/middle-router.jpg">

<img src="

http://img.photobucket.com/albums/v48/Pozican/bottom-router.jpg">

That was on all night. I'm very new with routers, and I have no clue what is wrong... Any ideas?

Alex

 

[khanza]

ok, let's try the pictures again?

 

[khanza]

FINE - here, are the url's to the stupid pictures! argh, this isn't my day...

http://img.photobucket.com/albums/v48/Pozican/top-router.jpg

http://img.photobucket.com/albums/v48/Pozican/middle-router.jpg

http://img.photobucket.com/albums/v48/Pozican/bottom-router.jpg

 

[robbym627]

What do you have connected to the ser ports?

 

[vipergg]

Whats your question and what are you trying to do and what do you have connected on the far end ?

 

[vipergg]

What you have is router that has booted correctly and is ready to be configured for whatever network you are trying to set up . Not a whole lot we can do for you , you need a network diagram with addreses and then configure the router accordingly .

 

[khanza]

Well normally doesn't it give you something like

router:

or something similar?