CISCO 1900 SWITCH OUT

[johng75]

i currently have a cisco 1900 switch that i would like to purge from my network, problem is i would like to use the current fiber connection if possible. the SN: WS-C1924C-A, and i would like to know what would switch out with minimal hassle.




Life is not a journey to the grave with the intention
of arriving safely in a pretty and well preserved body,
but rather to skid in broadside, thoroughly used up,
totally worn out, and loudly proclaiming

--"WOW-- What a Ride!"

 

[KiscoKid]

Try the following Cat 2950 switch - its fibre uplinks are compatible with what you have at the moment.

http://www.cisco.com/en/US/partner/products/hw/switches/ps628/ps630/index.html

 

[johng75]

is giving me a prompt for a username and password, that i do not have, do you have a full part number?



Life is not a journey to the grave with the intention
of arriving safely in a pretty and well preserved body,
but rather to skid in broadside, thoroughly used up,
totally worn out, and loudly proclaiming

--"WOW-- What a Ride!"

 

[KiscoKid]

Ah sorry about that. Cisco Part No is WS-C2950C-24. The text to be found there is as follows:

Cisco Catalyst® 2950C-24 is a member of the Catalyst 2950 Series Intelligent Ethernet Switches, and is a fixed-configuration switch that provides wire-speed Fast Ethernet connectivity for midsized networks. The Catalyst 2950 Series is an affordable product line that brings intelligent services, such as enhanced security, high availability and advanced quality of service (QoS), to the network edge—while maintaining the simplicity of traditional LAN switching. When a Catalyst 2950 Switch is combined with a Catalyst 3550 Series Switch, the solution can enable IP routing from the edge to the core of the network.

Available for the Catalyst 2950 Series, the Cisco Network Assistant is a free centralized management application that simplifies the administration task of Cisco switches, routers, and wireless access point. Cisco Network Assistant offers user-friendly GUI interface to easily configure, troubleshoot, and enable and monitor the network.

24 10/100 ports and two fixed 100BASE-FX uplink ports
1 rack unit (RU) stackable switch
Delivers intelligent services to the network edge
Enhanced Software Image (EI) installed
Ideal for advanced desktop access layer connectivity over fiber

 

[johng75]

thank you! looks like that will do it.



Life is not a journey to the grave with the intention
of arriving safely in a pretty and well preserved body,
but rather to skid in broadside, thoroughly used up,
totally worn out, and loudly proclaiming

--"WOW-- What a Ride!"