cisco 1841

[ipothos]

hi, i have a cisco router 1841 with a serial interface which accepts 2Mp connection and i want to configure its interface with multiple sub-intefaces , so i can assign multiple DLCIs to its sub-interface...

where can i find configuration examples of this scenario??

 

[pmoorey]

Hi,

See below for a very simple frame-relay config using sub-interfaces.


interface Serial1/1
no ip address
encapsulation frame-relay IETF
!
interface Serial1/1.1 point-to-point
bandwidth 128
ip address 172.16.252.1 255.255.255.252
frame-relay interface-dlci xxx CISCO
!

The link below contains a lot of info on frame-relay:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_c/wcdfrely.htm

Hope this helps!


Peter
CCNA, Cisco Qualified Specialist

 

[ipothos]

thanx my friend...

the link is quite helpful....