Cisco 1701, VCMUX & G.DMT help required

[stompin]

I have just got hold of a 1701 (ADSL & ISDN) router for work and have been trying to configure via the SDM interface. My ISP in the UK is Star who have stated the following requirements to connect;

1. PPOA protocol
2. VCMUX encap
3. G.DMT modulation.

Now when I go through the SDM prog I can find no option to configure the VCMUX encap or the G.DMT modulation. Does this mean these are not supported??. I really am getting upset with this cus I just can't get online so if anybody can help or post a guide to using the SDM prog I would be eternally grateful.

stompin

 

[themut]

The links below are excellent guidelines configuring 1700 routers using pppoa:

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e60.shtml

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e64.shtml

 

[ChrisAC]

On your atm0 interface you will need to use;

pvc 0/38
encapsulation aal5mux ppp dialer

Chris.


**********************
Chris A.C, CCNA, CCSA
**********************

 

[stompin]

You guys cheer's for the links and tech advice, but I still can't sort this one. I really need someone who has used the SDM manager to guide me through all the requirements. Internal routers are fine but this baby just baffles me..! - any more help would be appreciated.

stompin