Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Checkpoint HA
- Thread starter vallan
- Start date
You have a number of options, if you are running Nokia then it comings built in with HA - you use VRRP. You can also buy Checkpoints Cluster XL which does clustering or I believe there is a Windows cluster solution called RainConnect by Rainfinity...
Akiwondo (MCSE, CCSE)
Akiwondo (MCSE, CCSE)
- Thread starter
- #3
1) Bring up the SmartView Status client.
2) Expand the clust object by clicking on the plus sign.
3) Right click on the active cluster member, which in your case should be ch1.
4) From the resulting context menu click on "Stop Member"
5) The cluster will fail over to the standby member.
PS: Don't forget to restart the member you just stopped or it won't fail back over if there is a problem later.
2) Expand the clust object by clicking on the plus sign.
3) Right click on the active cluster member, which in your case should be ch1.
4) From the resulting context menu click on "Stop Member"
5) The cluster will fail over to the standby member.
PS: Don't forget to restart the member you just stopped or it won't fail back over if there is a problem later.
- Status
Similar threads
- Locked
- Question