Changing # of rings that go to VM 1

[gbixtelecom]

Good evening,

I was wondering if there is a way to change the number of rings from 4 to 1 when calling a VM box?

Thanks

 

[johnpoole]

 PT CFF CFRA PVCD CWRD
FNAD FDN
FNAT FDN
FNAL FDN
CFTA YES
CCFWDN
CFN0 3
CFN1 4
CFN2 6
DFN0 4

look at your cd (ld 21 prt cdb 0) for that set of prompts, cfn's are defined in the cdb. then on the set echg, changing rco from the default 0 to the desired number of rings. if you make a change switch wide, (cdb) then it changes all stations with that rco.. my switch is set to 3, 4 and 6.. to match rco 0, 1 and 2..

john poole
bellsouth business
columbia,sc

 

[gbixtelecom]

Hey, Mr. Poole, thanks for the response back. Looks like everything came works now. Thanks again for all the assistance!