I have an HP 4050N printer on my network. It has been giving me trouble so I loaned another printer from someone to test against the original. Problem: The loaned printer has a different IP address than my printer. How do I change it on the loaner? I looked on the control panel under IP settings but no info there on how to change it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing IP address
- Thread starter reddy1375
- Start date
- Moderator
- #2
You should be able to change it under the EIO settings, Configure Network --> Configure TCP/IP
Just my 2¢
-There once was a man from Peru
Who wanted to write a Haiku
but...
--Greg
Just my 2¢
-There once was a man from Peru
Who wanted to write a Haiku
but...
--Greg
you could also do it via the web page on the Jet Admin page. Just remember that when you apply the new IP address, that the page will do a post back (refresh) and give you a page not found. That is because the old IP address is in the URL. Telneting should also work, I like the web page better.
- Status
Similar threads
- Locked
- Question