Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing from H.323 to SIP on J100s

Status
Not open for further replies.

wallot

Vendor
Jul 15, 2009
250
US
Hi folks,

This one is mostly to have a place to search in the future.

I was having trouble changing my H.323 J179/J139 from H.323 to SIP 4.1.1.0.7.

After a little wasted time trying to figure out what was going on, getting an "invalid file" from the J179, I recalled from a past experience that in some cases I could not go direct to current without an interim update.

So, I successfully went from H.323 6.8.5 to SIP 3.0 first, then to SIP 4.1.1.0.7.

There may be some other options so feel free to share. :)

Thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top