Changing Calll Park DN's on 1000E

[tmac2414]

I want to change the Call Park DN's on a 1000E from 500-509 to 190-199. I try to change in LD 50 but SCH2387 tells me to turn off Call Park Option in LD 15.
I go to LD 15 and SCH2386 tells me there are system park DN's? What am I doing wrong?

REQ CHG
TYPE CPK
CUST 0
CPTM
RECA
SPDN 10 190
SCH2387
SPDN
>ERR SCH2387
SCH2387
System park DN cannot be deleted if Call Park option is CPA.
Change Call Park option to CPD in LD 15 and try again or new range must
completely cover system park DNs.
Severity: Info
****
OVL000
>LD 15
CDB000
MEM AVAIL: (U/P): 102120562 USED U P: 1377284 154503 TOT: 103652349
DISK SPACE NEEDED: 169 KBYTES
REQ: CHG
TYPE: CDB
CUST 0
AML_DATA
ANI_DATA
ATT_DATA
AWU_DATA
CAS_DATA
CCS_DATA
CDR_DATA
FCR_DATA
FFC_DATA
FTR_DATA YES
OPT CPD
SCH2386
>ERR SCH2386
There are system park DNs.

 

[StanleySteamer]

Try
SPDN 0
and CR through to remove the existing DN's.

Then do your SPDN 10 190.

 

[tmac2414]

I got it. I had to OUT the Call Park Data Block then rebuild as NEW.
Thanks STanleySteamer.