The site data on one of my locations needs to change because the site it moving. Using S8500 R012x.02.2.122.0. While many of the entries can be removed and changed, a few remain with an error stating to remove from stations first. I have checked all stations for site data (floor and building) and all are blank. Where else could the old site data be located so it can be removed?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change site-data 1
- Thread starter TeeJayWA
- Start date
-
1
- #2
I've notice the same type of thing many many many times and always seen it clear itself in about a week after the station entries were cleared out. I assume this is something to do with saved location info from tti. Try disabling tti and try removing it again. Floor / building info is also on the "change cabinet" screen.
-CL
-CL
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question