JBMedeiros
Technical User
I have a Phaser 840 and I would like to transform it into Duplex. Which the procedures, I would only have that to add more memory?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change Phaser 840 Standard to Duplex 1
- Thread starter JBMedeiros
- Start date
- Status
-
1
- #2
If you have the 840N and want to duplex you need to upgrade that to a DP model which also increases the RAM to 64meg. To do this you need the upgrade kit which includes the firmware DIMM which enables the duplex features. Simply adding the additional RAM will not do that.
- Thread starter
- #3
JBMedeiros
Technical User
Where I could find this DIMM with firmware for Duplex? Vc it would know to inform the code to me of the part?
- Status
Similar threads
- Locked
- Question
