Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change Incoming Caller ID Name Cisco AS5400
- Thread starter VoIPgirl
- Start date
I don't know is it possible or not.
But if I were you I would look for solution with TCL application on inbound dial-peer. You can change there "callinfo" array while sending setup by "leg setup".
You can analyze DNIS in this script and make some branches in algorithm.
Hope this will help you.
But if I were you I would look for solution with TCL application on inbound dial-peer. You can change there "callinfo" array while sending setup by "leg setup".
You can analyze DNIS in this script and make some branches in algorithm.
Hope this will help you.
- Status
