ch loudspeaker paging from merlin to s8700

[letman]

The merlin line comes out of a 400type pack and into a bogen tpu-15a amp. I have an aux trunk board (763d)in the s8700. Can I wire straight into the bogen amp after programing the loudspeaker paging in asa.

 

[mikeydidit]

I am pretty sure this will have to be wired from the Aux pack to a universal coupler and them to the amp. At least that is how mine is setup.

"Wise men speak because they have something to say; Fools because they have to say something."
(Plato)

 

[letman]

my fault. I was connecting to the second set of pinouts instead of the forth on the aux board. each port uses 3 pair.

 

[phoneguy55]

Yes. That is exaclty how I do it. From the aux board to the TPU. I use the mic input but others will work also. A univeral coupler can be used as Mikeydidit said, but I don't use them.