Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDR working with Server Edition and Digital Phones connected to expansion server

Status
Not open for further replies.

Loremtz

Technical User
Joined
Jun 11, 2013
Messages
96
Location
MX
Hi Guys!
I have a question about CDR with Server Edition. I have a Primary and Secondary server Edition in a site and 4 expansions servers (IPO500's) located in another sites, we'll call these exp server like Exp A,B,C,D . The entire solution share one of this expansion server to calls to PSTN with E1 lines (EXP A) and in the rest of them I have Digital phones 14XX connected, also we have SIP Extensions J1XX connected to the Primary Server.

My customer wants to join this deployment to a Third Party Billing (INTERTEL) server and they want to know if we need to buy a plan with just one server (Primary Server) or a plan with 5 servers (Primary, A,B,C,D)

I have another client with Primary and secondary server where I have just IP Phones registered to the primary server and 2 expansions server to E1 Lines and Analog Trunks, there is no problem 'cause all of the phone are showed registered in the Primary server, but in this deployment the Digital phones are showing registered in the expansions servers, I just want to know if both deployments works at the same way

I'll appreciate any comment
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top