CDR Setup, need help! 1

[BuckWeet]

Can someone help me with setting up CDR on my definity r9.5..

I've got the 8400 data module already. And the CDR Software. So I just need programming assistance. I know I need to setup a data mod, then setup some CDR settings. What else do I need to do. Any info would be appreciated.

Thanks

BuckWeet

 

[nknook]

Hello,

For the datamodule, I think you can use this setup:
[tt] DATA MODULE

Data Extension: 1003 Name: CDR BCC: 2
Type: pdm COS: 0 Remote Loop-Around Test? n
Port: x COR: 1 Secondary data module? n
ITC: unrestricted TN: 1 Connected To: dte
ABBREVIATED DIALING
List1:

SPECIAL DIALING OPTION:

ASSIGNED MEMBER ( Station with a data extension button for this data module )

Ext Name
1:
[/tt]

You would then need to enter this extension in the CDR form (change sys cdr), alternatively, you could also use the serial port (DTE on the back of Definity).
[tt]
CDR SYSTEM PARAMETERS
Page 1 of X
Node Number (Local PBX ID): 1 CDR Date Format: month/day
Primary Output Format: ___________ Primary Output Ext: 1003_
Secondary Output Format: ___________ Secondary Output Ext: _____
Use ISDN Layouts? _ EIA Device Bit Rate: ____
Use Enhanced Formats? _
Modify Circuit ID Display? _ Remove # from Called Number? _
Record Outgoing Calls Only? _ Intra-switch CDR? _
Suppress CDR for Ineffective Call Attempts? _ Outg Trk Call Splitting? _
Disconnect Information in Place of FRL? _ Outg Attd Call Record? _
Interworking Feat-flag? _
Force Entry of Acct Code for Calls Marked on Toll Analysis Screen? _
Calls to Hunt Group - Record: __________
Record Called Vector Directory Number Instead of Group or Member? _
Record Called Agent Login ID Instead of Group or Member? _
Inc Trk Call Splitting? _ Inc Attd Call Record? _
Record Non-Call-Assoc TSC? _ Call Record Handling Option: _________
Record Call-Assoc TSC? _ Digits to Record for Outgoing Calls: _________
Privacy - Digits to Hide: _ CDR Account Code Length: __
[/tt]

After this things depend a little on what accounting SW you use, on the previous form there's an option "Primary output format" that can be unformatted (uses a default non-changeble dataformat), or user-defined, wich gives you a second (or third) screen, on wich you can define the format yourself using the info from your CAS-SW supplier.

Also on the trunk form page 1, there's a field "CDR reports" wich should be set to "y".

Hope this helps,

Nico

 

[nknook]

Hmmmz, the screen-dumps aren't exactly what I expected them to be... sorry for that. :-(

Nico