Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CDR Output
- Thread starter TykeUK
- Start date
- Thread starter
- #3
Thanks Chris,
CM5.2
S8800 servers
Using RDTT to extract the CDR data.
Screen shots of the cdr setup below...
change system-parameters cdr Page 1 of 2
CDR SYSTEM PARAMETERS
Node Number (Local PBX ID): 1 CDR Date Format: month/day
Primary Output Format: customized Primary Output Endpoint: CDR1
Secondary Output Format:
Use ISDN Layouts? n Enable CDR Storage on Disk? n
Use Enhanced Formats? n Condition Code 'T' For Redirected Calls? y
Use Legacy CDR Formats? y Remove # From Called Number? n
Modified Circuit ID Display? n Intra-switch CDR? y
Record Outgoing Calls Only? n Outg Trk Call Splitting? y
Suppress CDR for Ineffective Call Attempts? n Outg Attd Call Record? y
Disconnect Information in Place of FRL? n Interworking Feat-flag? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
Calls to Hunt Group - Record: member-ext
Record Called Vector Directory Number Instead of Group or Member? n
Record Agent ID on Incoming? y Record Agent ID on Outgoing? y
Inc Trk Call Splitting? y Inc Attd Call Record? y
Record Non-Call-Assoc TSC? n Call Record Handling Option: warning
Record Call-Assoc TSC? n Digits to Record for Outgoing Calls: dialed
Privacy - Digits to Hide: 0 CDR Account Code Length: 15
change system-parameters cdr Page 2 of 2
CDR SYSTEM PARAMETERS
Data Item - Length Data Item - Length Data Item - Length
1: date - 6 17: in-trk-code - 4 33: return - 1
2: space - 1 18: space - 1 34: line-feed - 1
3: time - 4 19: in-crt-id - 3 35: -
4: space - 1 20: space - 1 36: -
5: sec-dur - 5 21: out-crt-id - 3 37: -
6: space - 1 22: space - 1 38: -
7: cond-code - 1 23: ppm - 5 39: -
8: space - 1 24: space - 1 40: -
9: code-dial - 4 25: isdn-cc - 11 41: -
10: space - 1 26: space - 1 42: -
11: code-used - 4 27: attd-console - 2 43: -
12: space - 1 28: space - 1 44: -
13: dialed-num - 18 29: vdn - 5 45: -
14: space - 1 30: space - 1 46: -
15: clg-num/in-tac - 10 31: acct-code - 15 47: -
16: space - 1 32: space - 1 48: -
CM5.2
S8800 servers
Using RDTT to extract the CDR data.
Screen shots of the cdr setup below...
change system-parameters cdr Page 1 of 2
CDR SYSTEM PARAMETERS
Node Number (Local PBX ID): 1 CDR Date Format: month/day
Primary Output Format: customized Primary Output Endpoint: CDR1
Secondary Output Format:
Use ISDN Layouts? n Enable CDR Storage on Disk? n
Use Enhanced Formats? n Condition Code 'T' For Redirected Calls? y
Use Legacy CDR Formats? y Remove # From Called Number? n
Modified Circuit ID Display? n Intra-switch CDR? y
Record Outgoing Calls Only? n Outg Trk Call Splitting? y
Suppress CDR for Ineffective Call Attempts? n Outg Attd Call Record? y
Disconnect Information in Place of FRL? n Interworking Feat-flag? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
Calls to Hunt Group - Record: member-ext
Record Called Vector Directory Number Instead of Group or Member? n
Record Agent ID on Incoming? y Record Agent ID on Outgoing? y
Inc Trk Call Splitting? y Inc Attd Call Record? y
Record Non-Call-Assoc TSC? n Call Record Handling Option: warning
Record Call-Assoc TSC? n Digits to Record for Outgoing Calls: dialed
Privacy - Digits to Hide: 0 CDR Account Code Length: 15
change system-parameters cdr Page 2 of 2
CDR SYSTEM PARAMETERS
Data Item - Length Data Item - Length Data Item - Length
1: date - 6 17: in-trk-code - 4 33: return - 1
2: space - 1 18: space - 1 34: line-feed - 1
3: time - 4 19: in-crt-id - 3 35: -
4: space - 1 20: space - 1 36: -
5: sec-dur - 5 21: out-crt-id - 3 37: -
6: space - 1 22: space - 1 38: -
7: cond-code - 1 23: ppm - 5 39: -
8: space - 1 24: space - 1 40: -
9: code-dial - 4 25: isdn-cc - 11 41: -
10: space - 1 26: space - 1 42: -
11: code-used - 4 27: attd-console - 2 43: -
12: space - 1 28: space - 1 44: -
13: dialed-num - 18 29: vdn - 5 45: -
14: space - 1 30: space - 1 46: -
15: clg-num/in-tac - 10 31: acct-code - 15 47: -
16: space - 1 32: space - 1 48: -
Hi
sorry it took so long, I was out of town.
Command on Definity is change intra switch cdr.
then enter all the stations you want to capiture for internal calling.
Remember they will only show on the cdr records if the sta answers.
Any problems , let me know
Thanks
Chris
sorry it took so long, I was out of town.
Command on Definity is change intra switch cdr.
then enter all the stations you want to capiture for internal calling.
Remember they will only show on the cdr records if the sta answers.
Any problems , let me know
Thanks
Chris
- Thread starter
- #6
Hi Chris,
Thanks for this but it's not what I am looking for, sorry I must not have explained my request properly.
We already have intra-switch set-up up, what I need is on each output record a field to show the extension number assigned to the record. The extension number will in most records be in the dialled to or from fields but for a database lookup function I was hoping there was an output field to show the extension number. That way a database lookup function could use the same column to pull records based on the assigned extension numbers.
Thanks
Lee
Thanks for this but it's not what I am looking for, sorry I must not have explained my request properly.
We already have intra-switch set-up up, what I need is on each output record a field to show the extension number assigned to the record. The extension number will in most records be in the dialled to or from fields but for a database lookup function I was hoping there was an output field to show the extension number. That way a database lookup function could use the same column to pull records based on the assigned extension numbers.
Thanks
Lee
- Status