hardeepsanghera
Technical User
Hi. I will be taking my CCNA tomorrow and I'm mostly worried about the sims. Can anyone tell me some of the sims on the CCNA recently?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CCNA Sims
- Thread starter hardeepsanghera
- Start date
- Status
CiscoGuy33
Instructor
hardeepsanghera,
Good luck on your CCNA exam.
What has been posted here over the last few months -
ACLs - blocking telnet/ping(this has been discussed in GREAT detail here)
OSPF in a sing. area
RIP config
configuring interfaces with correct IP address (VLSM)
setting passwords
general trouble-shooting with very minor fixes
general switch setup
Go back a few pages and just look at the many posts here, you will see lots about sims.
I have passed both the CCNA 607 and CCNA 801 (4 sims - 2 each) and they were very straight forward sim questions, but I configured a stack of 5 routers - completly erasing them and configuring them one by one several times before taking the CCNA exam.
Once again GOOD LUCK and do not make it too hard - they are designed to be done in just a few min.
E.A. Broda
CCNA, CCDA, CCAI, Network +
Good luck on your CCNA exam.
What has been posted here over the last few months -
ACLs - blocking telnet/ping(this has been discussed in GREAT detail here)
OSPF in a sing. area
RIP config
configuring interfaces with correct IP address (VLSM)
setting passwords
general trouble-shooting with very minor fixes
general switch setup
Go back a few pages and just look at the many posts here, you will see lots about sims.
I have passed both the CCNA 607 and CCNA 801 (4 sims - 2 each) and they were very straight forward sim questions, but I configured a stack of 5 routers - completly erasing them and configuring them one by one several times before taking the CCNA exam.
Once again GOOD LUCK and do not make it too hard - they are designed to be done in just a few min.
E.A. Broda
CCNA, CCDA, CCAI, Network +
hardeepsanghera,
First, I'm surprised that all of these sims have been seen on tests in the past few months. All of the posts that I have seen on the subject of sims seems to be that NAT and OSPF seem to be the flavor of the quarter. I took the exam twice and had 1 OSPF sim each time. Others have two sims in a given test. I don't know how that happens, but it does.
I put off taking the exam by a week on the second try because I wanted to make sure I had my sims down pat. Saved my bacon and it was also a great learning experience. I can set up nat quite well now, and when I look at my old NAT config on my 1605, I kind of have to laugh at how much of a mess it looks. hardeepsanghera, my best advice is make sure you've done some structured simulations, this package can help a lot - It lacks labs with VLSM, but you can make them up yourself as well.
Be prepared to know your subnetting/supernetting, CIDR, and to answer any questions on VLSM. You can't pass without be proficient in these areas.
-SnowNinja
First, I'm surprised that all of these sims have been seen on tests in the past few months. All of the posts that I have seen on the subject of sims seems to be that NAT and OSPF seem to be the flavor of the quarter. I took the exam twice and had 1 OSPF sim each time. Others have two sims in a given test. I don't know how that happens, but it does.
I put off taking the exam by a week on the second try because I wanted to make sure I had my sims down pat. Saved my bacon and it was also a great learning experience. I can set up nat quite well now, and when I look at my old NAT config on my 1605, I kind of have to laugh at how much of a mess it looks. hardeepsanghera, my best advice is make sure you've done some structured simulations, this package can help a lot - It lacks labs with VLSM, but you can make them up yourself as well.
Be prepared to know your subnetting/supernetting, CIDR, and to answer any questions on VLSM. You can't pass without be proficient in these areas.
-SnowNinja
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Helpful tip