Cant VPN through Draytek 2600 Router

[bluedollar]

I have setup a Draytek Vigor 2600 router as the manual has told me to do so.

All the clients can connect to the internet.

However I can not setup a VPN session from a windows 2000 machine.

I get the following message:

Error 678: There was no answer

The router diagnostic tools show:

=======================================================

current routing table

Key: C - connected, S - static, R - RIP, * - default, ~ - private

* 0.0.0.0/ 0.0.0.0 via 213.130.145.48, IF3
C~ 192.168.0.0/ 255.255.255.0 is directly connected,


=======================================================

Nat Redirection Table

NAT Port Redirection Running Table

Index Protocol Public Port Private IP Private Port
1 0 0 0.0.0.0 0
2 0 0 0.0.0.0 0
3 0 0 0.0.0.0 0
4 0 0 0.0.0.0 0
5 0 0 0.0.0.0 0
6 0 0 0.0.0.0 0
7 0 0 0.0.0.0 0
8 0 0 0.0.0.0 0
9 0 0 0.0.0.0 0
10 0 0 0.0.0.0 0


Protocol: 0 = Disable, 6 = TCP, 17 = UDP


=======================================================

NAT active sessions table


-------------------------------------------------------------------------------
Private IP ort #Pseudo Port Peer IP ort Ifno Status
-------------------------------------------------------------------------------
192.168.0.6 1829 35152 82.163.156.124 1723 3 0
192.168.0.6 1860 35120 82.163.156.124 1723 3 0

=======================================================

Does anyone know what I am doing wrong?

Any help would be greatly appreciated.

Thanks

Dan

 

[Batmaniac]

HI Bluedollar,
I have the exact same problem, take a look on

http://www.tek-tips.com/viewthread.cfm?SQID=886661&SPID=463&page=1

maybe it will help you.

if you solve your problem, please tell me how, I was unable to solve that ´til now.

thanks...

Rodrigo Ferreira
MCSE wannabe