Can't Remove a Station

[Toni269]

I've got a 9.5 system
When I try to remove a station I get an error:

Identifier not assigned

The station does have bridged appearances.

I've tried busying the bridged appearances, tried removing them, tried busying the station I want to remove and even re-booting the PBX.

Any ideas?

This happened after I tried importing too many stations with the same bridged appearance. I've been able to normally remove all of them except for 1

Thanks,

Toni

 

[mikeydidit]

I hate to be the one to tell you Toni but the last time we did that it took a reset system 1. It was escalated by the system to a reset system 2 to be able to remove them.

It seems these things really get squirrelly with too many bridged appearances.

"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read faq690-6594

 

[Toni269]

I did a reset system 4 that did not resolve it...

I can't remove the bridged appearances either...

I did clear two extensions with this problem before about a year ago but I can't remember how it was done...

Thank you for the ideas!