Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't get to internet with multihomed system

Status
Not open for further replies.
Guest_imported

Guest_imported

New member
Joined
Jan 1, 1970
Messages
0
We have a small network in which the server has two NICS one for each subnet. Each NIC has its own IP address and gateway but have the same subnet mask. Subnet 1 has access to the internet and Subnet 2 does not. I have one computer on Subnet 2 that I want to give internet access to. After setting up the TCP/IP settings I am able to ping all of the computers on both subnets but I cannot ping the modem. How do I set up the routing so that I can see the modem and get out to the internet? We are also using static addresses. Do I need to setup RIP internet protocol?
 
Status
Not open for further replies.

Similar threads

techbrain1
  • Question Question
Explorer Error the operating system is not compatible with this product
Replies
0
Views
260
techbrain1
techbrain1
ravalos
  • Locked
  • Question Question
Problem with PDFs in IIS
Replies
1
Views
2K
gbaughma
gbaughma
nukeinfer
  • Locked
  • Question Question
Internet restrictions for isolated PCs in the Network
Replies
1
Views
870
mangentle
mangentle
DTGMI
  • Locked
  • Question Question
WIN 10 Pro PC & Adding back to our Network
Replies
0
Views
775
DTGMI
DTGMI
DrB0b
  • Locked
  • Question Question
Windows 2016 IIS FTP server with a ton of user accounts
Replies
4
Views
1K
DrB0b
DrB0b

Part and Inventory Search

Sponsor

Back
Top