Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't connect to LAN

Status
Not open for further replies.

Regulluz

Technical User
Jun 14, 2002
129
PR
I have this system which had been through a very hard week. It first was not displaying e-mail messages correctly in Outlook 2003 from Exchange, then it turned out the Panda AntiVirus was causing the problem, and we disabled it. After finishing, the PC will not connect to the Network. I disconnected it from the Domain, and when tried again, no domain is found. The IP of that PC is unknown and it is being "taken"from a DHCP, which does not exist. There is actually a DHCP, but for example, DHCP Scopes are 10.10.10.1 and this machine is getting a 20.25.156.30 which is not part of the scoupe. If I assing a fixed IP, it can then connect to other systems for a while, and will disconnect after. It also won't let me browse the network. It is a Win2k system in a SBS2000 domain.

Please help!!
 
Thanks!!

I ended up formatting the PC, but I will have this little tool handy for the next time!

Appreciate your help!

Merry Christmas!

Reg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top