Can't complete this vector..

[Papagigo]

I have a G3si V11 and I am building the first VDN and vector in this system. I have enhanced conf. as a yes on the $$ page and have entered the info to build the Meet-me conf VDN.. So far so good! when I try to enter the following,

01 collect 6 digits after announcement 1
02 goto step 6 if digits = meet-me-access
03 collect 6 digits after announcement 2
04 goto step 6 if digits = meet-me-access
05 disconnect after announcement 3
06 goto step 11 if meet-me-idle
07 goto step 14 if meet-me-full
08 announcement 5
09 route-to meetme
10 stop
11 announcement 4
12 route-to meetme
13 stop
14 disconnect after announcement 6
15 stop
It will not take line 6 or 7 !! and the help key doesn't even show "meet-me-idle" or "meet-me-full" as an option

What am I overlooking?




Mike Higgins

 

[avayaman]

I have never tried to build a meet me conference vector, but it is a variation like an Attendant vector. There is a bug in Attendant vectoring that may also exist in a meet me conference vector & it is like the one you describe above, you do not receive the correct prompt.


Assuming this is a similar problem, simply enter anything that the prompt will take in lines 6 & 7 then save the vector. Go back into the vector again & now see if the correct prompts appear and you can change it.

Paul Beddows

Avaya Consulting, Implementation, One on One EAS & Definity Training for PBX Administrators.

Vancouver, Canada
E-mail avaya@vancouver.hm

 

[frankieg]

This is what my VDN's and vectors look like and work OK
VECTOR DIRECTORY NUMBER

Extension: 28282
Name: Meet-Me -VDN
Vector Number: 665

Meet-me Conferencing? y

COR: 1
TN: 1

CALL VECTOR

Number: 665 Name: MeetMe vector
Multimedia? n Attendant Vectoring? n Meet-me Conf? y Lock? y
Basic? y EAS? y G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? n
Prompting? y LAI? n G3V4 Adv Route? y CINFO? y BSR? y Holidays? y

01 collect 6 digits after announcement 39084
02 goto step 6 if digits = meet-me-access
03 collect 6 digits after announcement 39085
04 goto step 6 if digits = meet-me-access
05 disconnect after announcement 39086
06 goto step 11 if meet-me-idle
07 goto step 14 if meet-me-full
08 announcement 39087
09 route-to meetme
10 stop
11 announcement 39088

12 route-to meetme
13 stop
14 disconnect after announcement 39089
15 stop

 

[Papagigo]

frankieg,

Yours is a bit different than my switch, in my Vector#1 is has,

Basic, G3V4 Enhanced, and EAS are both =N
Also, I have ANI/11digits and ASAI Routing = N

So it looks like I don't have something turned on, although the $$ page show enhanced conf = Y

Any ideas ?

Mike Higgins

 

[n00benduser]

I have the same problem. If I find anything I will let you know. For some reason the vector does not query the meet-me conf. You may need to turn basic vectoring on, bu tI did and it still didn't work...

 

[RGarcia87]

Are you trying to do this in CMS? To my knowledge it will not allow you to create the vector in CMS, only the switch. Here is our vector:

Number: 130 Name: Meet me conf
Multimedia? n Attendant Vectoring? n Meet-me Conf? y Lock? y
Basic? y EAS? y G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? y
Prompting? y LAI? n G3V4 Adv Route? y CINFO? y BSR? y Holidays? y

01 wait-time 0 secs hearing silence
02 collect 6 digits after announcement 32057
03 goto step 7 if digits = meet-me-access
04 collect 6 digits after announcement 32058
05 goto step 7 if digits = meet-me-access
06 disconnect after announcement 32059
07 goto step 12 if meet-me-idle
08 goto step 15 if meet-me-full
09 announcement 32062
10 route-to meetme
11 stop
12 announcement 32060
13 route-to meetme
14 stop
15 disconnect after announcement 32061
16 stop

 

[Papagigo]

Even though I have "Enhanced Conf." check as "yes" in my
sys>para>cust>options, I must be missing something else. The top of my MEET-ME vector page shows, BASIC=N, in fact most of the options on the top are "NO" except conf=Y. This could be the key.
Therefore, when I try and use MEET-ME-IDLE or MEET-ME-FULL, it won't take it and is not an option using the "help" key.

Mike Higgins