We have been using HP SDLT drives (110/220GB) throughout our environment and just started upgrading some to SDLT II drives (160/320GB). The physical tape media (Quantum SDLT Media) is the same for both tape drive models so we began using the SDLT I formatted tapes in the SDLT II drives. We learned that these SDLT I tapes will not format to the larger 160/320 gb capacity. We have tried initiating manual FULL and QUICK formats, etc.
Whenever we put in a brand new tape (right out of the box) it will format to the SDLT II format with no problem.
We use the following Hardware/NOS/Backup Product: HP Proliant ML530 Server with HP internal or external SDLT II drive, NetWare 6.0/SP3 with ARCserve 7.0 with all the latest patches. Help if you can.
Whenever we put in a brand new tape (right out of the box) it will format to the SDLT II format with no problem.
We use the following Hardware/NOS/Backup Product: HP Proliant ML530 Server with HP internal or external SDLT II drive, NetWare 6.0/SP3 with ARCserve 7.0 with all the latest patches. Help if you can.