Cannot create crypto map on 3745

[SPHL]

Hi
I am unable to create a crypto map on a 3745 router. It is not an option. When I enter the command, I get the Invalid Input at marker (with the marker under the 'r' in crypto).

Overall goal is to create a GRE tunnel and apply IPSec.

Thank you in advance for your help.

 

[KiscoKid]

Do you have the right image? Can you paste a copy of 'show version' here pls

 

[SPHL]

Thank you for the prompt reply.

Cisco IOS Software, 3700 Software (C3745-IPBASE-M), Version 12.3(8)T3, RELEASE SOFTWARE (fc1)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Tue 20-Jul-04 21:07 by eaarmas

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

System returned to ROM by power-on
System image file is "flash:c3745-ipbase-mz.123-8.T3.bin"

Cisco 3745 (R7000) processor (revision 2.0) with 98304K/32768K bytes of memory.
R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3 Cache
2 FastEthernet interfaces
2 Serial interfaces
2 Channelized T1/PRI ports
DRAM configuration is 64 bits wide with parity disabled.
151K bytes of NVRAM.
31744K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

 

[KiscoKid]

I don't believe that image you have will support what you are trying to do.

You may probably need to upgrade the IOS to one that supports IPSEC (presuming your primary concern is to build a VPN tunnel or 2 on this router?). You can get IP Plus with IPSEC which may do it for you.