Can you tell remotely if a DN's cfw is active?

[sneb]

Hi Guys,

I've just been asked the above question by a tech who only has access to a tty and isn't on site so he can't walk round to the phone and check the cfw key. I know you could just ring the DN and see where it forwards to but I can't think of a way of "seeing" if it's active.
If I trac it shows Idle if I stat it shows Idle. If you print the set it shows the number next to the Cfw key but frpm memory that bears no relation to whether the cfw is active.Am I missing the obvious as usual?

Thanks

 

[trvlr1]

If it shows idle for the forward key position in LD 80 it is not actively forwarded.

 

[PERRYPJ]

When you TRAC the TN it will say ACTIVATED beside the key

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[johnpoole]

a trace of the set will show active cfw keys

ld 80
 trac 52 0 14 14

 TN 052 0 14 14
KEY 0  SCR MARP  IDLE
KEY 1  CFW ACTIVATED

KEY 2  NUL  IDLE
KEY 3  NUL  IDLE

john poole
bellsouth business
columbia,sc

 

[sneb]

Thanks guys I noticed the problem. I was entering "trac 0 3002" if I "trak 008 00 00 03" then I get the infomation that John posted.

KEY 0 SCR MARP IDLE
KEY 1 TRN IDLE
KEY 2 CFW IDLE
KEY 3 RNP IDLE
KEY 4 RGA IDLE

Thanks again