Can phones set the MWIs to phones on another PBX across a T1?

[3000gt]

If we have 2 3300s connected via a T1, can one phone set the MWI on a phone on the far end. Lets say they are both set up with ARS.

thanks,

Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

 

[kwbMitel]

Short Answer - Yes

Long answer, research Advanced Analog Networking in the help files.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[LoopyLou]

How far apart are the systems. I am assuming the T1 is from a carrier and you can't run MSDN to fully integrate the two 3300's.

 

[nytalkin]

best to use qsig trunks. mw feature codes as well as mw set codes tranport easily

NO GOOD DEED GOES UNPUNISHED!

 

[3000gt]

We want to use Qsig, and set MWIs with digital sets. Any description and/or list of commands of the networking programming would help.

Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs