Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can MICS Fiber Trunk Module use same cards as 8x24copper trunk module? 2

Status
Not open for further replies.

TedTheITGuy

IS-IT--Management
Joined
Mar 14, 2006
Messages
37
Location
US
Can MICS Fiber Trunk Modules use same cards as 8x24 Copper Trunk Modules?

 
Has nothing to do with trunk cards, cards are cards.
 
Actually some older cards dont have a notch.Have had to take a pair of cutters and make the notch.

6 months until ski season starts...sadly i must resign myself to the warmer weather"this will include a normal 8-5 work day, 5 days a week"
 
Cutting the notch and forcing the card to fit actually worked for you? -- I would have assumed the lack of notch was to make sure it was not accidentally inserted to a cabinet that could not support the card -- any idea what the notch was supposed to prevent?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top