benzguy777
Vendor
- Sep 17, 2002
- 74
I checked my PC and switched it's power supply to 115v. My concern if I can plug this into my UPS which is 100volts only instead of 110v.
I got the UPS from Japan as a present. It's an APC SMART UPS 1400.
I have run powerchute software an it says:
Internal Temp: 100 degress Farenheit
Output voltage: 107.2 VAC
Input Voltage: 107.2 VAC
Output Frequency: 60 Hz
I also checked my PCs power supply output voltage using a TESTER. Plugs to the Hard Drive read a constant 12volts and 5 volts.
I think it will be OK for my Monitor as it says 100-240v (auto-volt).
Is this setup OK for my PC's power supply?
Thanks!
I got the UPS from Japan as a present. It's an APC SMART UPS 1400.
I have run powerchute software an it says:
Internal Temp: 100 degress Farenheit
Output voltage: 107.2 VAC
Input Voltage: 107.2 VAC
Output Frequency: 60 Hz
I also checked my PCs power supply output voltage using a TESTER. Plugs to the Hard Drive read a constant 12volts and 5 volts.
I think it will be OK for my Monitor as it says 100-240v (auto-volt).
Is this setup OK for my PC's power supply?
Thanks!