Can a cell phone user call via the IPO to outcall Company CID 1

[myalias09]

IP500 5.0.8 VMPro
Can a cell phone user call through the IPO and pick up the main CID of the company rather than give out the cell CID?

-ex.On call person does not want CID of cell sent to customers.

 

[Westi]

called DISA and yes the voicemail Pro can do that, or Mobility can do it for you

Joe W.

FHandw., ACS

I don't suffer from insanity
I enjoy every moment of it

 

[TomMills]

use mobility. works very very well with the onex client installed on the mobile.

ftp://ftp.avaya.com/incoming/Up1cku9/SoftwarePub/4_2GA_Builds/One-X/One-X_Mobile_IP_Office_Device_Compatibility_List.pdf

http://www.twitter.com/Millsano85

See what my brain does when it's not thinking about phones.

 

[Bas1234]

You can also use SIP on 5.0(8)

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[myalias09]

OK
we do not have SIP or one-x, which leaves mobility or VMail.

DISA is the old school turm I'm familiar with. How would that be programmed via the VMPro? Is there any dos you can point me too?

 

[Bas1234]

Have a look here;

http://www.tek-tips.com/viewthread.cfm?qid=1267725&page=1

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[Westi]

you can make a DISA module that is accessible from the Auto Attendant (just make sure you password protect it and not with 1234 LOL) then people can dial into the system pick that option and enter the password and the number to dial and off they go. THis works well with PRI but not so good with analog lines.
I made a DISA module that you can import into the voicemail if you like

http://cid-4bad23a92d195341.skydrive.live.com/self.aspx/IP Office/Modules/DISA module.mod

Joe W.

FHandw., ACS

I don't suffer from insanity
I enjoy every moment of it

 

[myalias09]

Bas
The post Kyle speaks of is how mine is programmed and I'm getting a disconnect after entering the number. I can get to that point fine.

Westi
I'll give this a try. Thanks guys.