Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Callmanager 3.3
- Thread starter BuckWeet
- Start date
No, I'm pushing our vendor to get it done, but they're hedgy.
I'm looking for two features of the 3.3 release :
1. Programmable softkeys. *Finally* get "pickup" off the second level of softkeys. Stupid layout!
2. IPMA (Manager/Assistant)- it sounds pretty good. I'm not sure yet how this works, but even if it means re-doing our partitions (or maybe its region based) to get the best out of it, I'm there.
Cisco say its stable, but then they would. We're still a trial house for Call Manager, so once I've got it all going with our Unity/PA setup, I'll post an update.
I'm looking for two features of the 3.3 release :
1. Programmable softkeys. *Finally* get "pickup" off the second level of softkeys. Stupid layout!
2. IPMA (Manager/Assistant)- it sounds pretty good. I'm not sure yet how this works, but even if it means re-doing our partitions (or maybe its region based) to get the best out of it, I'm there.
Cisco say its stable, but then they would. We're still a trial house for Call Manager, so once I've got it all going with our Unity/PA setup, I'll post an update.
- Thread starter
- #3
- Thread starter
- #5
Yup, VG200 with 12.1.5YD (DSPFARM SOFTWARE) and then I tried it on a 3640 with the new 12.2.13T1 software where you can do Conferencing and X-coding in routers now..
With the 3640, the conference wouldn't build on the router, and would give me fast busy.
on the VG200 it'd build the conference, but there isn't any speech path..
When I take the exact configs and put them on a 3.2 CCM, works great...
BuckWeet
With the 3640, the conference wouldn't build on the router, and would give me fast busy.
on the VG200 it'd build the conference, but there isn't any speech path..
When I take the exact configs and put them on a 3.2 CCM, works great...
BuckWeet
I have installed CM 3.3 and it is very nice. I like the new IPMA application (you only really ad two partitions and an addition CSS depending on how you normally create them).
I also like the dial application dial rules. This is where you can setup a simple rule like if the number begins with X and there are X digits then remove Y and prefix Z. I am using it to help people with misdials.
But there are a lot:
AAR Groups
you also can register SRST endpoints
Just to name a few
I also like the dial application dial rules. This is where you can setup a simple rule like if the number begins with X and there are X digits then remove Y and prefix Z. I am using it to help people with misdials.
But there are a lot:
AAR Groups
you also can register SRST endpoints
Just to name a few
- Status