Caller Id on ISDN trunk

[rmack22138]

Hi all, I have a definity r9 and an ISDN trunk connected to a TPI 560P call back test set.
The problem I have is when I call from a definity phone, there is no caller ID. When I call from another system connected by an IP trunk, I do get the caller ID.

What do I need to turn on to get caller ID to work when I dail from a definity phone. I currenty dial the access
code to the ISDN trunk to get to the TPI test unit.

 

[AvayaTier3]

http://www.aucommunity.com/showthread.php?t=19442

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[rmack22138]

I don't have change pubic-unknown screen for r9

 

[AvayaTier3]

My bad

change isdn public

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[AvayaTier3]

change isdn public-unknown-numbering                     Page   1 of   8   SPE B
                    ISDN NUMBERING - PUBLIC/UNKNOWN FORMAT

Ext   Ext         CPN        Total CPN    Ext   Ext         CPN        Total CPN
Len   Code       Prefix       Length      Len   Code       Prefix       Length

 5    2      312652             10
 5    3      312693             10
 5    7      312737             10

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[rmack22138]

That wqs it. It works great.
Thank you.