Call Waiting on M3902 2

[captnamo]

Call waiting feature is new to me. I've set up Key 3 as CWT and modified CLS to SWA (allow internal call waiting) and WTA (allow warning tone).

The key appears on the display, but I get no warning tone when an internal call comes in when set is busy (on an internal or external call) as caller goes right to voicemail.

We'd like the caller to go to voicemail if the user doesn't pick up the waiting call. Do I have to do something different with HUNT which is currently set to go to voicemail? Here's the TNB:

DES C112
TN 196 1 03 00 VIRTUAL
TYPE 3902
CDEN 8D
CTYP XDLC
CUST 0
ERL 5
FDN 4170 {voicemail}
TGAR 5
LDN NO
NCOS 4
SGRP 0
RNPG 63
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS CTD FBD WTA LPR PUA MTD FNA HTA ADD HFA GRLA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD SLKD CCSD SWA LNA CNDA
CFTA SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CDMR PRED MCDD T87D PKCH
CPND_LANG ENG
RCO 0
EFD 4170 {voicemail}
HUNT 4170 {voicemail}
EHT 4170 {voicemail}
LHK 0
PLEV 00
PUID
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 5580 41 MARP
CPND
NAME Alfonse VanderSchmasma
XPLN 15
DISPLAY_FMT FIRST,LAST
01 CFW 4 5678
02 SCC 3660
03 CWT
04 TRN
05 MWK 4170
DATE 29 JUN 2012

Any suggestions will be appreciated!

 

[jaxuser]

Chg CLS to WTD and retest...

 

[kstaff22]

change the call forward by type CFTA to CFTD--and then remove the hunt---HTD

 

[captnamo]

If I remove the hunt DN, what happens to a call waiting call that isn't answered? No voicemail?

 

[jaxuser]

You can put the hunting back but change the WTA to WTD so that the CWT key will ring and user won't get a camp on tone.

 

[captnamo]

ERR SCH5053 CPTA must have WTA class of service.

 

[kstaff22]

with hunt removed the set will be alerted by the call waiting key that a call is present--they can then either put the origianl call on hold and press the CWT to answer---or let the follow the FDN to 4170.

make sure that the CDB is set for opt CWRA (cfna treatment for call waiting calls on a DN allowed)

 

[captnamo]

DOH! Of course the unanswered second call will still go to voicemail as I've only taken away the HUNT not the FDN. DOH!

So, in summary, I added key CWT (Call Waiting), changed CLS (class of service) by (1) changing HTA to HTD (HUNT denied); (2) adding SWA (internal call wait allowed); and (3) adding WTA (call wait tone allowed).

So, now user gets short beep tones on the phone when a second call comes in on her M3902. She successfully put the first call on hold and pressed the CWT key to pick up the second call. Ended the second call and picked up the first call that had been on hold.

Great solution for a Mental Health Clinician to get notice that an appointment has arrived even though she's on the phone. Thanks everyone for your help on this! Tek-Tips Nortel members ROCK!