call trace

[ajc718]

I am trying this "list trace station xxxx" on a G3V6r.03.246 and it does not work is there another way to do it. I need to trace how a call is routing.

 

[telcomwork]

That's a pretty old release. I don't know of a way in realt time but if you just need to see how it's routing out depending on internal or external....

Example External where 1650 and Xs are the number your dialing:
list ars route-chosen 1650xxxxxxx#

 

[ajc718]

I need internal. tried list ars ana. I have a did when called from out side it works but from internal it does not.

 

[jffmsly]

Make sure you are doing this in terminal emulation and not gedi

 

[irisngen]

List trace will not work with a R6

 

[ajc718]

It does not work in either mode

 

[ajc718]

Thank you Irisngen. Do you know any other method..

 

[irisngen]

Yes, you can check the ARS for the area code, "disp ars a 1XXX" that will give you the route pattern that the call will follow. depending on how many trunks you have (over flow) thats the trunk your call went out on.

 

[irisngen]

Sorry, i didnt see that you want the internal part, what exactly is it you want to know about the routing.

 

[ajc718]

I got my answer by looking at cdr what happens is this we have did's going to customer except this 1 that is not in group he ported the number so on net is dont work but if you dial from offnet it does. I tracked it down to the route in switch and the routing was removed and call was not set to go offnet.

Thanks for your help