Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Manager 4.2 - Need help re: hunt pilot I set up

Status
Not open for further replies.
Googi74

Googi74

Technical User
Joined
May 29, 2008
Messages
1
Location
US
Hi- Hope I can articulate this:

The members of the line group would like to be able to distinguish if calls to their line are from the hunt or not. Currently they only see the calling number. What can I do so that some way it's displayed that the called number was the dn which is forwarded to the hunt?

Thanks in advance!
 
Status
Not open for further replies.

Similar threads

wolf8963
  • Locked
  • Question Question
Grandstream HT841 with call manager
Replies
3
Views
1K
wolf8963
wolf8963
Edwin Effandy
  • Question Question
Cisco Manager 8.6.2 always hang to be remote after restart via CLI Command becomes normal
Replies
0
Views
119
Edwin Effandy
Edwin Effandy
mikedphones
  • Locked
  • Question Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
836
mikedphones
mikedphones
keyset6
  • Locked
  • Question Question
Resume call on hold from an ATA line
Replies
0
Views
332
keyset6
keyset6
smrikard
  • Locked
  • Question Question
Need Unity OVA install file for ISR 4331
Replies
1
Views
877
smrikard
smrikard

Part and Inventory Search

Sponsor

Back
Top