Call logging problem 1

[aprasha]

Hi there!

I have a very strange problem...I am using call logging in 4 RAIs, but I have a little problem with one of them.
I use the same form for all of them:
CLFOC:FORM=6,DATA=1-4J&2-1M&3-4P&4-1M&5-5K&6-1M&7-5N&8-1M&9-20E&10-1M&11-20G&12-1M&13-6T;

No problem with that except one of the RAIs: The duration field (5K) represented by HMMSS (hour - minutes x2 - seconds x2) appears with only 4 characters (no hour represented)in one of the RAIs, and there is two spaces between this field and the next.

It's the same FORM for all, but the problem is only in one of them.

An example:
In one of the rest of the MDs:
1223 1642 00338 00008 22222 922222222 010101

This call appears in the problematic MD as:
1223 1642 0338 00008 22222 922222222 010101

I've recreated the file, created another one, recreated the FORM, used a different FORM instead of number 6 (used FORM=4), used 6K in the definition (but it's min-4, max-5), used a FORM with only this field (1-5K) but still the same problem...

Any UNIT for RFBOI? Any idea?...

Thx to all!!

 

[aprasha]

UNIT for RFPUI, I meant...

 

[whosrdaddy]

if these are BC11 systems I would compare CLCCP printouts.
units for call logging CLP or CLPS1 and CLOP or CLOPS1 depending on what system you have.

greetings,

http://www.damovo.com

 

[NIUX]

Hi,

Compare ASPAPARNUM=122; between the MD's

BR///

 

[aprasha]

That was it!! The PARVAL was 6 instead of 1.
Thx very much for helping me both of you!