Can the routes/switch be configured to forward the ANI of the caller id information of the A Party when an extension is forwarded? When you get a forwarded call from your office you get the caller id information of your desk phone instead of the person calling.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call ID Info Forwarded
- Thread starter JosieL
- Start date
This can be done if you have BC11 or BC12 Software.
It is called Original A-Number. The problem is that the Carrier may not allow you to send out this CLI as they may only Accept Numbers that are within your DDI Range.
To turn Original A-Number on you need to set ADC D22 on the Dest.
It is called Original A-Number. The problem is that the Carrier may not allow you to send out this CLI as they may only Accept Numbers that are within your DDI Range.
To turn Original A-Number on you need to set ADC D22 on the Dest.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question