Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call forwarding ext to extension 1

Status
Not open for further replies.
phoneguru

phoneguru

Instructor
Joined
Sep 23, 2002
Messages
14
Location
US
Yes this question makes it quite clear i have NO manuals for the indivual phones on this system. What is the code to call forward incoming calls from one extension to another? Thanks in advance for this simple question:-)
 
Sort by date Sort by votes
It depends on what is programmed in the numbering plan using feature 70 Forward All. To determine what code is programmed to forward all, using EMML at the Command Prompt type DIS NP, press Enter and scroll/page down until you find Feature 70. Use the same command on a TTY port
 
Upvote 0 Downvote
BLESS YOU! Seriously-thanks just what I needed!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Cfayard
  • Locked
  • Question Question
Response to Fujitsu 9600 and E630 Systems
Replies
0
Views
620
Cfayard
Cfayard
lwooten281
  • Locked
  • Question Question
When forwarding our Fujitsu 9600 fr
Replies
1
Views
569
montyzummer
montyzummer
PKHawks
  • Locked
  • Question Question
Forwarding calls from Cisco to Fujitsu not working
Replies
1
Views
316
NewNic
NewNic
rnbarrett
  • Locked
  • Question Question
Fujitsu F9600 to Cisco Call Maneger via DMS-100
Replies
12
Views
739
rnbarrett
rnbarrett
steve6787
  • Locked
  • Question Question
Fujitsu 9600 with Call Accounting Software
Replies
5
Views
359
steve6787
steve6787

Part and Inventory Search

Sponsor

Back
Top